Next Working Day Available - Order Before 2pm

Oltre 100.000 Progetti Completati con Successo

Black PolyBrick Garden Composter

Compostiere da Giardino

Una compostiera che non diventa essa stessa compost

Il compost degrada il contenitore che lo ospita. Le vasche PolyBrick® non ne risentono: nessun marciume, nessun trattamento, nessuna sostituzione, e giunti aperti che permettono al cumulo di respirare.

Perché PolyBrick funziona in questa applicazione

C'è una certa ironia in un compostiera di legno. Il cumulo al suo interno è una macchina per degradare la materia organica, e il contenitore è fatto di materia organica. I pallet durano due o tre anni. Il legno trattato dura qualcosa in più e mette il preservante a contatto con il compost che poi si distribuirà sulle colture alimentari.

PolyBrick non è nutrimento per il cumulo. Non marcisce, e il materiale è inerte: nulla migra dalla vasca al compost. È stabilizzato ai raggi UV, quindi il lato esposto al sole non diventa fragile mentre quello in ombra rimane umido.

L'altro vantaggio è pratico: poiché i blocchi si incastrano a pressione senza essere fissati, la vasca può essere smontata. Chiunque abbia provato a rivoltare un cumulo o a svuotare un contenitore attraverso uno sportello piccolo capisce perché questo sia rilevante.

Applicazioni tipiche

  • Vasche singole per compostaggio domestico
  • Sistemi a due e tre vasche per compostaggio a rotazione
  • Vasche per foglie e macerato fogliare
  • Compostaggio in orti e giardini condivisi
  • Stoccaggio di sfalci e verde di risulta
  • Vasche per letame e stoccaggio di concime organico
  • Stoccaggio di cippato e corteccia
  • Progetti scolastici e orti didattici

Dati tecnici in sintesi

Assemblaggio Incastro a pressione. Nessun attrezzo, nessuna malta, nessun fissaggio
Accesso I corsi frontali possono essere rimossi per aprire la vasca durante la rivoltatura e lo svuotamento
Aerazione Costruire con giunti aperti tra i blocchi in modo che l'aria raggiunga il cumulo attraverso le pareti
Base Aperta sul terreno, così lombrichi e microrganismi possono colonizzare il cumulo e il percolato defluisce liberamente
Contatto con il compost Inerte. Nessuna cessione di sostanze al compost destinato alle colture
Materiale Polipropilene 100% riciclato, stabilizzato UV, prodotto in Europa con materie prime recuperate
Vita utile 25 anni con garanzia
Manutenzione Nessuna. Un risciacquo occasionale è tutto ciò che serve

Costruire per favorire la respirazione

Un cumulo di compost ha bisogno di aria. Senza di essa il processo diventa anaerobico: più lento, più freddo, e responsabile di quell'odore acido che spinge molte persone ad abbandonare il compostaggio.

Costruire le pareti laterali con giunti deliberatamente aperti tra i blocchi, anziché a contatto pieno, in modo che l'aria circoli attraverso le pareti per tutta l'altezza del cumulo. È lo stesso principio di una vasca a doghe di legno, senza il problema del legno che marcisce.

Lasciare la base aperta sul terreno. Lombrichi, funghi e batteri colonizzano il cumulo dal basso, il percolato defluisce invece di ristagnare, e il cumulo rimane in contatto con il suolo da cui proviene.

Perché tre vasche rendono più di una

Una vasca singola è un posto dove mettere i rifiuti verdi. Un sistema a tre vasche è un processo, e produce una quantità notevolmente maggiore di compost utilizzabile con meno fatica.

Il principio è semplice: la vasca uno è quella che si sta riempiendo ora, la vasca due è quella riempita in precedenza e in piena fermentazione, la vasca tre contiene il compost maturo pronto all'uso. Quando la vasca tre si svuota, tutto scorre di una posizione, e il trasferimento del materiale da una vasca all'altra lo rivolta e lo aera, accelerando l'intero processo.

Poiché il sistema è modulare, è possibile iniziare con una sola vasca e aggiungere le altre man mano che i volumi crescono, senza dover impegnare l'intera configurazione fin dal primo giorno.

How it goes together

  1. Choose a level spot with reasonable access. You will be wheeling barrows to it in all weathers, so a route that is not across wet lawn is worth having.
  2. Clear the ground and level it. Leave the base as bare soil rather than paving it, so the heap stays in contact with the ground.
  3. Lay the first course and check it level in both directions. Everything above follows it.
  4. Build up the back and sides in courses, leaving gaps between blocks for airflow, and staggering the joints between courses.
  5. Build the front as loose, stackable courses that lift out rather than as part of the structure. This is your access.
  6. Where you are building multiple bays, share the dividing walls between them.
  7. Cap the top course if you want a finished edge, and leave the top open or cover the heap with a sheet or old carpet to keep rain off.

The removable front

This is the detail that makes a bay pleasant to use rather than a chore, and it is where most bought bins fail.

Build the front wall as courses that simply lift out. Fill the bay with the front in place, then remove the courses one at a time as you dig the heap out, so you are always working at a comfortable height with the face of the heap open to you.

Compare that with a plastic dalek bin, where finished compost is at the bottom, under everything you have added since, behind a hatch the size of a letterbox. The removable front is the single biggest reason people actually turn their heaps.

Sizing the bay

Bigger heaps work better. A heap needs enough mass to hold heat, and a small bin loses it to the outside faster than the process generates it, which is why little bins produce cold, slow compost.

Around a cubic metre is the usual working minimum for a heap that heats properly. Below that, composting still happens, it is just slower and stays cooler, which means weed seeds and roots survive it.

Do not go so wide that you cannot reach the middle with a fork. Depth front to back is more useful than width, and if you have the space, another bay beats one enormous one.

Muck heaps and green waste

The same structure works for manure storage, grass clippings and wood chip, and for those the material advantage is even clearer, because these are wetter, heavier and harder on a container than garden compost.

For muck heaps, check what applies to you on storage siting and run-off before you build. Rules on storing manure near watercourses, ditches and boreholes vary, and the position of the heap matters more than the bay it is in.

Get it right first time

The one thing worth knowing: put it somewhere you will actually walk to.

The most common composting failure is not technique, it is distance. A bay at the far end of the garden, across the lawn, behind the shed, gets used enthusiastically in spring and abandoned by October when it is dark and wet.

Site it somewhere on a route you already take, with a firm approach underfoot. Slightly less tidy and considerably more used beats beautifully hidden and full of nettles.

Ask our engineer

Questions about bay sizing, multiple bay layouts or muck heap storage? Ask below, or get in touch directly.

Common Questions

Things that frequently come up when carrying out this project.
Why use plastic blocks for a compost bay instead of wood?

A compost heap is a machine for breaking down organic material, and a wooden bin is organic material. Pallets last two or three years, and treated timber puts preservative in contact with compost you may spread on food crops.

PolyBrick does not rot and is inert, so nothing moves from the bay into the compost, and it is UV stabilised so the sunny side does not go brittle.

Does a compost bay need gaps for airflow?

Yes. A heap without air goes anaerobic, which is slower, colder and produces the sour smell that makes people abandon composting.

Build the side walls with deliberate gaps between blocks so air moves in through the walls along the full height of the heap. It is the same principle as a slatted timber bay, without the slats rotting.

Should the compost bay have a base?

Leave it open to bare soil. Worms, fungi and bacteria colonise the heap from below, liquid drains away instead of pooling, and the heap stays in contact with the ground.

Paving underneath cuts the heap off from the organisms that do the work.

How big should a compost bay be?

Around a cubic metre is the usual working minimum for a heap that heats properly, because a heap needs enough mass to hold heat and small bins lose it faster than the process generates it.

Below that, composting still happens but stays cool and slow, which means weed seeds and roots survive. Do not go so wide that you cannot reach the middle with a fork.

How do you get the compost out?

Build the front wall as loose courses that lift out rather than as part of the structure. Remove them one at a time as you dig the heap out, so you are always working at a comfortable height with the face of the heap open.

It is the single biggest reason people actually turn their heaps, compared with a bin where finished compost sits at the bottom behind a small hatch.

Is a three bay system worth it?

It turns composting from storage into a process. Bay one is what you are filling, bay two is actively rotting, bay three is finished and ready to use. When bay three empties everything shifts along, and moving material between bays turns and aerates it, which accelerates everything.

Because the system is modular you can start with one bay and add others as volume grows.

Can I use it for a muck heap or grass clippings?

Yes, and the material advantage is even clearer, because manure, clippings and wood chip are wetter, heavier and harder on a container than garden compost.

For muck heaps, check what applies to you on storage siting and run-off before building, since rules on storing manure near watercourses, ditches and boreholes vary and the position matters more than the bay.

Does the bay need a lid?

Not structurally, but covering the heap helps. Keeping heavy rain off stops the heap becoming waterlogged and cold, and retains warmth.

A sheet, a board or an old carpet over the top is enough, and it can be lifted off when you add material.

Will it need any maintenance?

No. There is nothing to rot, treat, stain or replace, and no fixings to work loose. Rinse it down if you want to, but that is the extent of it.

The blocks carry a 25 year warranty and can be dismantled and reused elsewhere if you reorganise the garden.